00

days

00

hours

00

minutes

00

seconds

Book a meeting before the offer expires

Check booking availability

Installation video library

Installation video library
2 min. read
eMailFacebook Pinterest
Mounting a kitchen, installing a bathroom or building your new tailormade wardrobe? Here, you can see how a professional Kvik Installer works – and then do it yourself at your own pace. Browse all our installation videos here in one place.

Mounting kitchens, installing a bathroom or building your new tailormade wardrobe: even if you have done DIY projects before, it is well worth your time to watch how a professional Kvik Installer works - and then do it yourself at your own pace.

 

Note that these are not instruction videos - just guides that illustrate the installation process, all videos are in English.

 

Below is the complete list of video guides for our Kitchens, Wardrobes and Bathrooms. Please find the number of the one you need and scroll down to find it.

Kitchen

  1. Mounting your new kitchen - a general walkthrough
  2. Mounting the plinth
  3. Mounting of plinth leg
  4. Correct positioning of kitchen cabinets
  5. Sink cabinet - cutting for drain
  6. Cutting for cooking hob - cabinet
  7. Cutting for cooking hob - work top
  8. Dishwasher installation
  9. Corner cabinet with Lemans carousel
  10. Assembly of door for a microwave oven
  11. Installation of Aventos system for top cabinets
  12. Mounting of handles
  13. Mounting laminate worktop
  14. Mounting end cabinet 
  15. Adjusting - drawers and fronts

Wardrobe

16. How to mount your new Vario 19

17. How to mount your new Module 16

18. Mounting Soft Close for sliding doors

Bath

  • 19 How to mount your new bathroom furniture

#1 . Mounting your kitchen

Watch this video to see:

  • How to measure for sink
  • Cutting for electrical outlets and plumbing
  • Cutting for a cooking hob
  • Mounting ending panels
  • Levelling out all elements
  • Mounting laminate worktops
  • Mounting filler
  • Cutting for cooking hob
  • Mounting handles
  • How to adjust drawer fronts and doors

#2 . Mounting the plinth

Watch This video to see:

  • Plinth assembly
  • Adjustment of floor unevenness
  • Adjustment for a dishwasher
  • Sweeping lists

#3 . Mounting plinth leg

Watch this video to see:

  • Mounting legs on cabinets
  • Mounting air vent to plinth
  • Clipping plinth to legs

#4. Placing cabinets correctly

Watch this video to see:

  • Lining up cabinets in the correct order to match plan drawing

#5. Sink cabinet - cutting for drainage

Watch this video to see:

  • Measuring and cutting for plumbing from the wall and floor.
  • Measuring and cutting for electrical outlets from the wall

#6. Cabinet - cutting for a cooking hob

Watch this video to see:

  • Cutting a cabinet to fit a cooking hob

#7. Worktop - cutting for cooking hob

Watch this video to see:

  • Transferring suppliers technical measurements to worktop
  • Cutting of the worktop
  • Mounting hob

#8 . Mounting a dishwasher

Watch this video to see:

  • Mounting foil and protective metal plate to work top
  • Mounting front cover and handle using handle template (not included)
  • Securing a dishwasher into a cabinet
  • Video does NOT show connecting water/drain nor power

#9. Corner cabinet with LeMans carousel

Watch this video to see:

  • Out of the box assembly of cabinet
  • Mounting supporting metal profiles
  • Mounting door hinges and doors
  • Assembly and mounting of carousel

#10. Mounting of laminate worktop

Watch this video to see:

  • Unpacking
  • Mounting support beam
  • Cutting cabinets for assembly pieces
  • Joining worktop at the correct angle
  • Fixing worktop to cabinets

#11. Mounting of handles

Watch this video to see:

  • Drilling correct holes using drilling template
  • Mounting handles

#12. Assembly of door for microwave oven

Watch this video to see:

  • Measuring for and drilling for door brackets
  • Installing door, installing door fronts

#13. Mounting of filler

Watch this video to see:

  • Customising filler
  • Drilling for and mounting filler
  • Securing cabinets to wall and worktop

#14. Adjusting drawers and cabinet doors

Watch this video to see:

  • Adjusting drawer fronts to line up
  • Adjust drawers to close tightly
  • Adjusting door hinges in all dimensions

#15. Top cabinet - installing the Aventos system

Watch this video to see:

  • Using plans to drill for and install Aventos
  • Mounting cabinet fronts

Wardrobes

#16. Wardrobe - mounting Vario 19

Watch this video to see:

  • Tools list
  • Out of the box assembly, including stabilising cross
  • Measurement and placing of wardrobe
  • Adjusting to level
  • Securing cabinet to the wall (07.30)
  • Mounting of end panels
  • Mounting top and bottom rails
  • Mounting top and bottom rail system

#17. Wardrobe - mounting Module 16

Watch this video to see:

  • Tools list
  • Out of the box assembly, including stabilising cross
  • Measurement and placing of wardrobe
  • Mounting of customised parts - using templates
  • Securing cabinet to the wall 
  • Mounting of end panels
  • Mounting top and bottom rails
  • Mounting the top and bottom rail system

#18. Wardrobe - how to mount the soft close on Kvik sliding doors

Watch this video to see:

  • Drilling for and mounting soft close system inside rails

Bathroom

#19. Bathroom - how to mount bathroom cabinet

Watch this video to see:

  • Measuring for sink cabinet
  • Placing and measuring for tall cabinet
  • Cutting cabinet for plumbing
  • Correct mounting of suspension list
  • Mounting of sink cabinet and tall cabinet
  • Unpacking of sink, centring and mounting
  • Sealing above and below sink
  • Mounting of door and drawers
  • Mounting handles on doors using template
  • Adjusting drawer fronts line up and tightly close